Online Store

At Overhead Door^TM Co. of Indianapolis & Muncie, we understand that full garage door replacement isn’t always necessary. Sometimes you just need a part or two.

We are proud to offer the following products in our online store:

Garage door remote controls
Operator drawbar plates
Torsion spring cables
Photo cells
Keypads

Garage Door Remote Controls

Order Now »

37219R Overhead Door Mini Remote

Three button mini CodeDodger® remote control (Generation II). Features an automatic seek technology that responds to either a 315mhz or 390mhz frequency to reduce any potential external radio interference. This remote has CodeDodger 2® (2010-Current) access security system that is also compatible with CodeDodger 1® (1995-Select Current) technology. This remote control will operate up to three different garage door openers and provides a low battery warning when the battery needs to be replaced.

Compatible with all Overhead Door Code Dodger and Genie Intellicode garage door openers.

This remote control is standard with all Overhead Door Odyssey 1000 (model# 7030), Odyssey 1200 (model #8030), Destiny 1200 (model # 8030), and Destiny 1500 (model # 8060) garage door openers.

¹ *This remote control may not function properly with some model produced before 2009. Please use Part# 37345R if you are needing to control multiple door manufactured prior to 2009.

PRICE: $78.50 +Shipping Order Now »

Order Now »

37345R-Overhead Door Master Remote

This 3 button remote control is compatible with all Overhead Door and Genie garage door opener products from 1993 to the present.

It is compatible with

All Overhead Door gated community receivers
Overhead Door and Genie 912 transmitters
Overhead Door Code Dodger series I (auto seek dual frequency 315/390 mhz)
Genie Intellicode series I (auto seel dual frequency 315/390 mhz)
Overhead Door Code Dodger series II (auto seek dual frequency 315/390 mhz)

If features

3 large, easy to find buttons
LED indicators
Simple programming for all models of use
Easily mounts to the car visor
Uses the CR2032 coin cell battery
Visor clip and programming instructions are included

PRICE: $93.00 +Shipping Order Now »

Order Now »

38502R Single Overhead Door Remote

Single button mini CodeDodger® remote control (Generation II). Features an automatic seek technology that responds to either a 315mhz or 390mhz frequency to reduce any potential external radio interference. This remote has CodeDodger 2® (2010-Current) access security system that is also compatible with CodeDodger 1® (1995-Select Current) technology. This remote control will provide a low battery warning when the battery needs to be replaced.

Compatible with all Overhead Door Code Dodger and Genie Intellicode garage door openers.

This remote control is standard with all Overhead Door Odyssey 1000 (model# 7030), Odyssey 1200 (model #8030), Destiny 1200 (model # 8030), and Destiny 1500 (model # 8060) garage door openers.

¹ *This remote control may not function properly with some model produced before 2009. Please use Part# 37345R if you are needing to control multiple door manufactured prior to 2009.

PRICE: $65.00 +Shipping Order Now »

Order Now »

11163-3901 Single Button Overhead Door 390mhz 3-Position Dipswitch Remote

Single button remote control. This remote is compatible with all Overhead Door garage door openers that use a 390mhz receiver with 3-position dipswitches that control the code setting. This is also compatible with the Horton external receiver that is used in some residential applications.

PRICE: $79.00 +Shipping Order Now »

Operator Drawbar Plates

Order Now »

Operator Drawbar Plate Part# 406947-6 (19”) 406947-3 (21”) 406947-2 (24”)

Garage door reinforcement plate. Used when attaching a garage door operator to the door. This provide a sturdy place for the operator door bracket to mount to. Available in three different sizes (19”, 21”, 24”) depending on how tall the top section of your garage door is.

*Failure to install the operator plate before attaching a garage door opener will result in the warranty on the door being voided.

PRICE: $42.00 +Shipping Order Now »

Torsion Spring Cables

Order Now »

1/8” Torsion Spring Cable (Available For 7’ Tall or 8’ Tall Doors)

These cables are for Residential Use Only. 1/8” Heavy Duty cables for use on a torsion spring set up. These cables are used mainly on wood doors and heavier carriage house style steel doors.

Cable Size: 1/8″ 7×19. Length 101″ (7’ Tall) 112” (8’ Tall)

Replacing garage door cables require the tension on the counterbalance spring system to be released. Extreme caution is required.

Order quantity is a set (pair) only. Specify whether you have an 8’ tall or 7’ tall garage door. The 7’ set can be adjusted to accommodate doors with a height of less than 7’. The 8’ set can be adjusted to accommodate a door with a height greater than 7’ and less than 8’. First price listed is for the 7′ high, an the second price listed is for the 8′ high.

PRICE: $45.00
$50.00 +Shipping Order Now »

Order Now »

3/32” Torsion Spring Cable ( Available for both 7’ tall and 8’tall garage doors)

These cables are for Residential Use Only. 3/32” Cables for a standard torsion spring set up. These cables are used on both insulated and non-insulated residential steel garage doors.

Cable Size: 1/8″ 7×19 Length 101″ (7’ Tall) 112” (8’ Tall)

Replacing garage door cables require the tension on the counterbalance spring system to be released. Extreme caution is required.

Order quantity is a set (pair) only. Specify whether you have an 8’ tall or 7’ tall garage door. The 7’ set can be adjusted to accommodate doors with a height of less than 7’. The 8’ set can be adjusted to accommodate a door with a height greater than 7’ and less than 8’.
First price listed is for the 7′ high, an the second price listed is for the 8′ high.

PRICE: $37.00
$41.00 +Shipping Order Now »

Photo Cells

Order Now »

37221R Codedodger Photo Cells

Complete photocell kit (Safe-T-Beam®) including both the receiver (Red) and transmitter (Green) photocells with mounting brackets factory attached.

This system is compatible with all Overhead Door CodeDodger® and Genie Intellicode® garage door openers manufactured since 1995. This is a required safety system and the opener will not function properly without the photocells attached.

Note: This photocell kit can not be used to upgrade the safety features of a garage door opener that currently does not utilize photocells.

PRICE: $80.00 +Shipping Order Now »

Keypads

Order Now »

Keypad Model 37225R

Code Dodger wireless keyless entry, Series II (keypad) with a White flip up cover. Compatible with all Overhead Door Code Dodger and all Genie Intellicode garage door openers built since 1995. This keyless entry features a lighted keypad and will allow you to control up to three different garage doors from one keypad. Programming instructions are included.

This keyless entry includes:

Auto seek dual frequency automatically finds the best operating frequency of 315 or 390 MHz
Temporary PIN feature allows access to cable or phone worker, plumbers etc. which clears once the owner’s master PIN is entered
CODE DODGER/INTELLICODE 1 and 2 compatible

PRICE: $80.00 +Shipping Order Now »